Differences

This shows you the differences between two versions of the page.

--- updating [2024/10/22 09:09] – torte
+++ updating [2025/02/19 09:31] (current) – torte
@@ Line 1: / Line 1: @@
-===== Sovol KlipperScreen =====
+{{page>redirect#this_wiki_has_moved}}
+https://torte71.github.io/InsideSovolKlipperScreen/update_problems.html
+{{page>redirect#section}}
+----
+===== Sovol KlipperScreen (Makerbase MKS KLIPAD50) =====
 ==== Updating ====
   * see also: https://github.com/3DPrintDemon/How-to-Update-Sovol-Klipper-Screen-To-Latest-Klipper-SV06-and-SV07
@@ Line 82: / Line 87: @@
       * Vasyl's guide: https://github.com/vasyl83/SV07update
     * You can also find a readily prepared image (built as on my guide) here: [[image|Image]]
 == KlipperScreen / Python 3.8 ==
+The last version of KlipperScreen that works with python 3.7 is v0.4.1.
+I guess the easiest fix is resetting KlipperScreen to that revision and never updating it afterwards. That means:
+  * Log into the KlipperScreen using SSH or Putty and enter the following commands:
+  * ''cd ~/KlipperScreen''
+  * ''git reset --hard v0.4.1''
+(I haven't tested this, but it is taken from the KlipperScreen FAQ at https://klipperscreen.readthedocs.io/en/latest/FAQ/ )
+Other options are:
+  * Revert the whole system to its original state by flashing the emmc card with Sovol's image (and not updating afterwards): https://drive.google.com/file/d/1A1-Rw1vDPUT4pnvMOBWTd098l2aShehC/view
+  * Flash a recent armbian image to the emmc card (then you can update afterwards).
+  * Maybe its possible to manually download, compile and install python 3.8, but I'd expect many issues with that (possibly missing dependencies, too little free space on the emmc). https://devguide.python.org/getting-started/setup-building/
-== Timelapse ==
+== Moonraker Timelapse ==
+The moonraker timelapse script has a dependency check at the starts, which prevents the installation on the outdated Armbian buster version.
+By removing that check, it should be possible to install the timelapse script.
+See Gergo's [[https://www.youtube.com/watch?v=86CFV_CbrvQ&t=457s|Youtube guide]]
 ----
 Back to [[start]]